Easy steps to build your Mist system

To prevent getting affected due to the sun's radiation mist systems are used commonly.  They are an indigenous invention where fine droplets of water are let out which in turn vaporizes and thus cool the atmosphere it is it. The vaporization of this mist results in instant cooling of the air that surrounds it. They are used outdoors in most cases and during hot climates to keep people cool. They save your skin from terrible trouble that sun's powerful radiations are capable of. They also keep your pets cool and devoid of uneasiness during the scorching summer months. You can make a structure that keeps you cool all by yourself at  home!

Materials needed - The materials that  you would require to complete constructing a mist system at your home are;

1. Garden hose - 1
2. .75" garden hose  adapter - 1
3. Spray bottle  (with a screw cap)
4. Water supply

It is very  simple to make a homemade cooling system. The materials needed are commonly  available at any home.

And now let's  see the construction;

Construction:

Clean the spray bottle and its cap  thoroughly. This will ensure that there is no dust or unnecessary particles in your bottle or spray nozzle. Then screw up the hose adapter to the bottom of the nozzle of the spray bottle. Make sure they are fastened tightly so that leakage will be prevented. Then attach the hose to the adapter. Even this part should be fixed as securely as possible to prevent any future leakage. Allow the water to pass through at a low speed. Now rotate the cap on the nozzle of the sprayer bottle so that water escaped freely. The amount of water that comes out and the speed at which it comes out solely depends on the nozzle that you use. You may be required to tape or glue some parts so that water flows out freely and at the right amount. If there is too much imbalance, then make use of rubber bands to secure it temporarily.

Usage

After constructing the system, it is essential that you use it properly to get the most of what it can offer to you.  Firstly hang it at a convenient place of your wish in the air. This place should be the one that you want to cool down. If there is no room to hang it then with the help of a rotating fan you can diffuse the mist from the hose.  This also gives room to faster evaporation process. But care should be taken while you fix a fan in front of the hose. Neither should be disturbed.  Otherwise an electric fault may be caused as a result. High temperatures are the best time to obtain the benefits of this product.