Methods of Joinery in Buckinghamshire

Buckinghamshire is a non metropolitan home country in South east England. Here in Buckinghamshire Joinery furniture and toys are very common to find.

Joinery usually means joining together pieces of hard or soft wood to create furniture, toys, structures and many other different things. A single piece of wood can either be carved to make a piece of structure or many pieces of wood can be connected together to create an attractive structure. This method by which two pieces are connected together to make a furniture or structure is known as Joinery. Joinery Buckinghamshire involves everything from nailing, screwing or gluing of the piece of wood. A person, who has mastered in this field, can then use these wood working joints to make many types of different projects.

There are many methods of connecting two pieces of wood together. Some of these methods are as follows:

-          Butt Joints:

This is the basic method of connecting two pieces of wood. One piece of stock of wood is butted against another with the help of glue. Then that joint is strengthened with the help of nails or screws. Although it isn’t considered to be the strongest of joints still it is useful in some situations. If the wood worker uses proper techniques then the butt joints will come out very strong. To get quality butt joint, see to it that the ends of two boards are cut into as square as possible so that they end up matching perfectly.

-          Mitered Butt Joint:

Mitered Butt Joint is usually used to rectify the Butt joint as in a Butt joint the end grain of one of the board is visible. Mitered Butt Joint makes the piece of wood look cleaner. This type of joint too is not very strong.

-          Mortise and Tenon Joints:

Mortise and Tenon Joints are also known as the simplest and strongest type of joints. These joints have been used from many years by wood workers especially when one piece of wood has to be joined to another at 90 degrees or lesser angle. In this type of joint one piece of wood is inserted into another with the help of fastener or glue.

-          Tongue and Groove Joinery:

If the wood worker has to join two matched boards into one board, then he usually uses Tongue and Groove Joint as this joint is stronger than a Butt Joint.

-          Pocket Joinery

A screw which is driven diagonally from one board to another to form a joint is called Pocket Joints. But you must take care that the path of the screw must be pre drilled so that the head piece doesn’t break into two pieces. Glue can also be used here as it will add strength to the joint.

-          Doweling:

A dowel is a round evenly cut stick of wood which is inserted into perfectly matched holes of the board. This type of Joinery is a very old one and is very durable and strong for joints.