Common Problems and Solutions of Dreambox 500

1、FTP software can’t read the paper of machine(can’t be connected to the computer)

When you are sure the routers and network are working, the problem is usually a firewall, and put off the firewall it will be ok.

2、The machine have strong signal and noise ratio, but the picture has a mosaic

The standard of machine is not set on correctly, do not set it into widescreen, in the system settings, set it to full screen can solve the problem. Live operators will also invert this problem, of course, there may be a four-cutting issues.

3、Dm500 remove programs list shows in the methods

With FTP access Dm500, to ensure normal access to Dm500, then find the Var into tuxbox into the config into the enigma, found in the directory services in the enigma then right click and select to delete, restart(you must do it, or you can’t delete it, It is best to restart power) the receiver, it will be ok.

4、Dm Series conversion channel to display a temporary pause

Isn’t it that there is a little uncomfortable when there is a pause? Seeing if you are in tick here to allow a fast switching in the advanced settings, there will be no pause if you repeal the hook, but the screen is slow to switch at this time, sometimes the sound out but the picture is not out yet.

5、Dm500 delete the channel in the menu directly

Press the OK button on the remote control program then the menu appears, select the channel needs to be removed (don’t press the OK button), there is a delete items appears if you press MENU button in the menu, delete it, it is ok, continue to operate to remove duplicate, this can get rid of those unsightly and useless channels.

6、The method of Dm500 sets Parental Lock

Open Settings button of DM500, then choose the Parental Lock, tick the Parental Lock, appears on the right to change PIN, the hidden service provider will appear at the bottom, press the right button of the remote control to access, enter the PIN number set by yourself two times, save it, hide the locked service provider voluntary, hidden, the channel you want to lock will not appear in the playbill, if not, one program will be there. Then exit, the program you want to lock will not be read by others. If you want to unlock it, go to setting again, then the program edit, at this time there will be an editorial column of lock unlocks service, after entering and putting into the PIN number you can watch the programs you locked.