Paintless Dent Removal From Dent Medic

Dent Medic provides paintless dent repair services to all of Broward, and Southern Palm beach Counties. Their mobile service will travel to your location home, work, etc. Free estimates are the norm, and most repairs can be done on the initial visit. They serve all of Broward and Southern Palm Beach counties including Coral Springs, Coconut Creek, Parkland, Weston, Margate, Davie, Fort Lauderdale, Pompano Beach, Deerfield Beach, Boca Raton, Boynton Beach, Delray Beach. Repairs are done while you wait.

Paintless Dent Removal (PDR) is the process of removing dents and dings by massaging the back side of the dent with specially designed tools. Repairs generally take less than 1 hour and can be done almost anywhere. Repairs are still possible. Some scratches associated with dents may buff out, leaving paint in good condition. Chips and scratches through the paint may be touched up with paint. Any visible dent or ding can be repaired. Some difficulties arise if the dent is so deep the metal has stretched. Free estimates are customary in these cases. Plastic Bumpers are also repairable; commonly corners are pushed in. The most common methods of paintless dent repair utilize metal rods and body picks to push the dents out from the inner side of the body panel being repaired. Also, glue may be used from the outside of the panel to pull the dents out. In either case, fine-tuning of the repair often involves "tapping" down the repair to remove small high spots, making the surface flat. Paintless Dent Repair may be used on both aluminum and steel panels. If a technician pushes too hard when creating these high spots, the paint will split and the repair is ruined. Paintless dent removal is a collection of techniques for removing minor dents and dings from the body of a motor vehicle. A wide range of damage can be repaired using PDR however, usually if there is paint damage, PDR may be unsuitable. Fluorescent lighting, or in some cases a light-reflection board, is used to see the shadows created by the deformation of the dent. This is an important aspect of the repair process. Without a Paintless Dent Repair light board or reflector board, the fine detail of the process is unseen, and the technician cannot locate their tool specifically and cannot remove the damage accurately. The process of Paintless Dent Repair requires a technician to specifically push exact locations of metal to a precise height, which can only be witnessed with use of a PDR reading instrument, such as a Paintless Dent Repair reflector board or Paintless Dent Repair light.