Cable heating pads and heating stages

Cable heating system and heating stages of open areas used for snow melting and prevent the formation of ice in the winter. Heating stage and heated outdoor areas used for maintenance of outdoor areas in the state of the ice in the winter to improve security, facilitate labor-intensive work on the clearance of ice and snow.

Heating stage and open spaces - is a simple and convenient solution of traditional problems of winter! 

about gutter heaters

The basis of the heating system is an armored heating sections. Set in asphalt, concrete or other coating protects the surface of the armored sections from freezing. Thus, we can protect the area in front of the garage, difficult sections of roads, bridges, runways, ramps, stairs, walkways, etc.
Armoured heating sections are connected to the thermostat. The thermostat automatically turns on or off the heating. The heating system and heating pads steps formed on the surface to melt snow and ice melt and water is discharged to drain heated trays to drain.
For heating stairs specific power output shall be not less than 300 W/m2, and heating pads not less than 250 W/m2.

Advantages of cable heating step and open spaces:

Fits on any surface.
Eliminates time-consuming and dangerous for the mechanical cleaning of surfaces.
To minimize injury to the most dangerous areas.
Sidewalks, paths, steps etc. continuously maintained in good condition.
Eliminates the inefficient drugs to combat icing (use of salt or other means).
Prevents damage to the cover, which are inevitable in shear ice and snow clearance, thus increasing the service life of pavement several times.
Automatic control makes the system efficient and cost effective.
The heating system consists of open spaces:

Heating part, which consists of armored fins. The heating part of the task transformation of precipitation in the form of snow or ice into the water up to their complete removal.
Fasteners that are used to facilitate installation of armored fins and sensors.
Distribution and information network, which is due to the heating elements of the food supply and inform the signals from the sensors to the control panel. Consisting of information and power cables, distribution box and mounting hardware.
Management system, which contains the control box (if necessary), temperature controllers for systems de-icing, temperature sensors, control gear and protective equipment, appropriate system capacity and performance of the class of the control cabinet.
Together - a small weather station, which specifies the time on and off the system. At the same time ensuring maximum energy savings (80%).
For heating systems platforms, including the steps of heating a small area may use the simplified method of control. A simplified method of control involves the use of only one air temperature sensor (poluavtoamatichesky mode).

Heating stage and open spaces - assembly:

There are many options for mounting heating systems platforms and steps, depending on the structure of the pavement.